Tamper-evident machines
Compare short bands that cross a cap, lid or neck and the tunnel needed to finish them.
Tamper-evident machines →Tamper-evident bands
Tamper-Evident Neck Band Applicators for Caps and Closures
Tamper-evident neck bands use a short shrink sleeve around the cap, lid or closure to provide a visible security seal and improve pack confidence.
Neck bandsCap sealsJar lid sealsSecurity sleevesTamper evidence
Best-fit applications
Where this sleeve applicator route usually fits.
A neck band applicator is usually a compact automatic sleeve applicator paired with a short heat or steam tunnel. Sample testing confirms that the band sits squarely and shrinks without lifting or twisting.
- Bottle cap bands in food, drink and personal care
- Jar lid security seals and tamper-evident rings
- Nutraceutical and pharmaceutical-style closure bands
- Packs where band position and perforation need repeatability
- Cap diameter, lid height and shoulder clearance
- Band cut length and lay-flat width
- Perforation or tear-strip requirement
- Container pitch and stability before the tunnel
- Tunnel heat profile to avoid cap or product damage
Specification checks
Details to confirm before choosing the machine.
Good sleeve applicator selection starts with the real pack, the real sleeve and the target output. The checks below help narrow the applicator, conveyor and tunnel route before a quotation is prepared.
Related pages
Compare nearby sleeve applicator options.
These pages help connect the search route to the correct machine family, application type or quotation checklist.
Jar and tub sleeves
Check lid geometry, band position and opening perforations on jars and tubs.
Jar and tub sleeves →Contact
Send the pack, sleeve and output details to Lancing, or use the telephone and email details on the enquiry page.
Contact →FAQ
Tamper-evident bands questions
Can a sleeve applicator apply only a neck band?
Yes. Short sleeves can be applied around caps, necks and lids when the machine is set up for the band cut length and pack geometry.
Do neck bands need perforation?
Many tamper-evident bands use perforation or a tear feature, but the need depends on the pack, closure and end-user opening method.
Can one machine run cap seals and full sleeves?
Some applicators can run different sleeve lengths, but this must be checked against the feeding system, guides, change parts and tunnel size.
Project support
Send container, sleeve and output details for a practical shortlist.
Lancing can review the pack format, sleeve material, target speed, tunnel route and line layout before recommending a sleeve applicator configuration.