Bottle sleeve applicators
Sleeve applicators for bottle sleeves, neck bands and full-body shrink labels.
Compare bottle sleeve applications →Lid bands
Lid Band Applicators
Lid bands are short sleeves used to secure or indicate tamper evidence around jars, tubs and pots. The rim and lid shape determine whether the band will shrink cleanly.
JarsTubsLidsTamper bands
Rim and lid fit
Band design depends on the lid geometry.
A lid band needs enough surface area to grip without sliding or distorting. The rim, lid overhang and container taper should be measured together.
- Lid diameter
- Container rim
- Band height and shrink area
Opening experience
Perforation should support clean removal.
Tamper bands should tear where intended and avoid damaging the label or container during removal.
- Perforation position
- Consumer opening direction
- Final shrink grip
- Choosing only by machine speed before testing the real container and sleeve
- Ignoring pack stability, side guides and conveyor transfer points
- Using the wrong tunnel route for the sleeve material or bottle shape
- Leaving cut length, lay-flat or perforation tolerance until after ordering
- Forgetting coding, inspection, accumulation and downstream packing space
Avoid poor fit
Common issues to check before ordering.
Small pack or sleeve differences can change the correct applicator, mandrel, conveyor and tunnel arrangement. These checks help prevent a machine being chosen on headline speed alone.
Quote details
Information that helps shortlist the correct sleeve applicator route.
For a useful recommendation, send the container dimensions, filled weight, sleeve material, lay-flat, cut length, target output, photos or drawings, and where the sleeve needs to sit on the pack. If the project is going into an existing line, include available conveyor height, line direction, utilities and footprint.
- Container diameter, height, shoulder shape and filled weight
- Sleeve material, lay-flat, cut length, perforation and artwork position
- Required output in bottles per minute or packs per hour
- Tunnel choice, utilities, conveyor height and available footprint
- Changeover range, spare parts and operator access
Related pages
Useful related sleeve applicator pages.
Jar and tub sleeve applicators
Sleeving routes for jars, tubs, lids and tamper-evident bands.
Compare jar and tub sleeving →Request a quote
Send product, sleeve and output details to Lancing for review.
Request a sleeve quote →FAQ
Lid Band Applicators questions
Can lid bands be used on tubs?
Yes if the lid and rim profile provide a stable shrink area.
Can jars and tubs run on one machine?
Possibly, with size parts and setup changes.
Do lid bands need a tunnel?
Yes, the band needs to be shrunk into position.
Project support
Send the pack, sleeve and output details for a practical shortlist.
Lancing can review the packaging format, sleeve material, shrink tunnel requirement and line layout before recommending the most suitable sleeve applicator configuration.