Full-body applicators
Continue comparing the machine, application and project details for this sleeve applicator requirement.
Open page →Tapered bottles
Sleeve Applicators for Tapered Bottles and Curved Containers
Tapered bottles, curved shoulders and conical containers can move the sleeve during application or shrink, so samples are essential before finalising the machine route.
Tapered bottlesCurved shouldersShaped sleevesSample testingTunnel control
Best-fit applications
Where this sleeve applicator route usually fits.
A tapered bottle often requires careful sleeve length, cut position and tunnel set-up. The goal is to control where shrink begins so the sleeve pulls evenly into the desired final position.
- Cosmetics, drinks and personal-care containers
- Bottles with shoulder curves or waist shapes
- Full-body sleeve projects with branded artwork
- Applications where conventional labels do not sit cleanly
- Diameter at top, middle and base
- Sleeve drop position before shrink
- Taper direction and shoulder geometry
- Risk of sleeve lift, twist or wrinkle
- Tunnel sequence and shrink start point
Specification checks
Details to confirm before choosing the machine.
Good sleeve applicator selection starts with the real pack, the real sleeve and the target output. The checks below help narrow the applicator, conveyor and tunnel route before a quotation is prepared.
Related pages
Compare nearby sleeve applicator options.
These pages help connect the search route to the correct machine family, application type or quotation checklist.
Shrink sleeve labelling
Continue comparing the machine, application and project details for this sleeve applicator requirement.
Open page →Quote checklist
Continue comparing the machine, application and project details for this sleeve applicator requirement.
Open page →FAQ
Tapered bottles questions
Are tapered bottles difficult to sleeve?
They can be more challenging because the sleeve may move, wrinkle or pull unevenly during shrink.
Can artwork be aligned on tapered bottles?
It may be possible, but artwork position should be checked with the sleeve supplier and confirmed through samples.
Which machine is best for tapered bottles?
The right route depends on pack stability, output, sleeve length and tunnel result rather than the bottle shape alone.
Project support
Send container, sleeve and output details for a practical shortlist.
Lancing can review the pack format, sleeve material, target speed, tunnel route and line layout before recommending a sleeve applicator configuration.