Bottle sleeve applicators
Sleeve applicators for bottle sleeves, neck bands and full-body shrink labels.
Compare bottle sleeve applications →Tamper evidence
Tamper-Evident Band Applicators
A shrink band over a cap or lid can show visible signs of opening or interference. Check where the band bridges the closure and how it tears on the finished pack. An intact band alone cannot establish that a pack has never been opened.
BandsCapsJarsSecurity
Visible security
Tamper bands need clean position and perforation.
A good band sits level, shrinks evenly and tears as intended. Poorly positioned bands can look unprofessional or make opening difficult.
- Level band position
- Perforation location
- Consistent shrink around cap
Machine choice
Choose around the pack range.
Different caps, jars and bottle sizes may need different guides, mandrels or setup settings.
- Diameter range
- Band height range
- Change parts and setup records
- Choosing only by machine speed before testing the real container and sleeve
- Ignoring pack stability, side guides and conveyor transfer points
- Using the wrong tunnel route for the sleeve material or bottle shape
- Leaving cut length, lay-flat or perforation tolerance until after ordering
- Forgetting coding, inspection, accumulation and downstream packing space
Avoid poor fit
Common issues to check before ordering.
Small pack or sleeve differences can change the correct applicator, mandrel, conveyor and tunnel arrangement. These checks help prevent a machine being chosen on headline speed alone.
Quote details
Information that helps shortlist the correct sleeve applicator route.
For a useful recommendation, send the container dimensions, filled weight, sleeve material, lay-flat, cut length, target output, photos or drawings, and where the sleeve needs to sit on the pack. If the project is going into an existing line, include available conveyor height, line direction, utilities and footprint.
- Container diameter, height, shoulder shape and filled weight
- Sleeve material, lay-flat, cut length, perforation and artwork position
- Required output in bottles per minute or packs per hour
- Tunnel choice, utilities, conveyor height and available footprint
- Changeover range, spare parts and operator access
Related pages
Useful related sleeve applicator pages.
Jar and tub sleeve applicators
Sleeving routes for jars, tubs, lids and tamper-evident bands.
Compare jar and tub sleeving →Request a quote
Send product, sleeve and output details to Lancing for review.
Request a sleeve quote →FAQ
Tamper-Evident Band Applicators questions
What products use tamper-evident bands?
Bottles, jars, tubs and containers with caps or lids often use them.
Can one machine apply bands and full sleeves?
Some systems can, but the sleeve range and tunnel settings must be checked.
Do all bands need perforation?
Most consumer tamper bands need perforation for clean removal.
Project support
Send the pack, sleeve and output details for a practical shortlist.
Lancing can review the packaging format, sleeve material, shrink tunnel requirement and line layout before recommending the most suitable sleeve applicator configuration.
Functional approval
Approve the band by position, shrink and opening behaviour.
A neck band can look acceptable while being too loose, too difficult to open or positioned incorrectly for the closure. A controlled trial should measure the unshrunk band, record its applied position, shrink it using the intended tunnel process, allow it to cool and then test the agreed opening action across representative packs.
ControlWhat to recordWhat the check prevents
Band dimensionsLay-flat, cut length, finished height and toleranceLoose bands, excessive grip or inconsistent closure coverage.
Applied positionHeight and rotation before the tunnelMisplaced perforations and variable finished coverage.
PerforationType, position, direction and intended opening actionBands tearing in the wrong place or resisting normal opening.
Tunnel resultRecipe, dwell, pack temperature, cooling and finished gripOver-shrink, loose bands, distortion and closure damage.
Functional testOpening method, visible evidence and retained accepted sampleRelying on appearance alone for a functional requirement.
Use the neck-band and perforation specification with the sample-testing guide before final approval.
Buyer questions
Questions about tamper-evident band applicators
Is a tamper-evident band the same as tamper-proof packaging?
No. A tamper-evident band is intended to provide visible evidence that the closure area has been opened or disturbed. Final suitability, claims and any regulatory obligations remain application-specific and should be assessed by the product owner.
Should the perforation be tested after cooling?
Yes. Film grip and opening behaviour can change as the pack cools and stabilises. Test representative finished packs after normal cooling and handling, not only immediately at the tunnel exit.
Can one band fit several closure sizes?
Only when the lay-flat, cut length, closure geometry, application position and shrink result are acceptable across the whole range. Trial the smallest and largest commercial formats and do not assume one successful sample proves every intermediate pack.